Home SiteMap Products ServiceSupport SalesSupport Downloads
 AboutUs News Accessories Installation RequestQuote Search
 
Quick Set
 

Standard Features
  • Shipped totally pre-assembled on a Harford truck
  • Equipped with Harford standard 4" non-CFC polyurethane insulated wall panels
  • Standard Harford wall, floor and ceiling panel construction.
  • Membrane roof cap for superior weather protection.
  • Sloped roof to keep rain away from adjacent building
  • Harford's Super Door construction has smooth, can-action hinges, flush fit and Posi-Seal design to increase economy of operation.
  • Door section includes heated vent on freezer door, 1/8" rainshield aluminum tread plate for doors not sealed to adjacent building and outside weather-proof cap.
  • Drain line from each evaporator completely factory installed and trapped to exterior of walk-in
  • Freezer defrost time clock is mounted inside the weather housing and set to defrost four times per day
  • Harford's tri-action heated vent permits opening and closing of the door with ease
  • Easy-to-read dial thermometer
  • Vapor-proof interior light
  • The Quick Set is shipped with a 6" band of 1/8" aluminum tread plate as a finishing trim around full perimeter of the walk-in, 1/8" below top surface of roof, and flush with bottom surface of the floor
  • The Quick Set is erected on 1 1/2" X 4" X 3/16" steel tubing lying on the 4" side. Runners are mounted 12" off the long end of the floor panels and at 23" increments between the outside runners. The steel tubing is drilled through each floor lock and attached by use of a self-tapping screw through the lock
  • Available in sizes up to 14' wide by 40' long by 8'6" high
Back to Walk-Ins